SPECIAL EVENT / 11 to 13 March 2026

PROTOTYPING SHOULD BE FLEXIBLE.

See SiOCAST live at ARBURG Technology Days.

Turn a conventional Injection Molding Machine (IMM) into a system ready to run our patented injection process with SiOCAST vulcanized silicone molds — Plug & Play.

Request a private meeting

Traditional prototyping is rigid:

weeks of lead time, high tooling cost, and slow iteration every time the design changes.

The SiOCAST way 

SiOCAST Phase 2 is a plug & play ecosystem that lets you validate designs with real injected parts—fast.
Instead of committing to metal tooling too early, you inject into vulcanized silicone molds to iterate quickly, reduce risk, and move to pre-series without tooling lock-in.

Plug & Play on standard IMMs

(fast setup, like a mold change)

Injected prototypes in hours

using real plastic materials

Silicone tooling in days

(not weeks)

Tooling cost dramatically lower

Multi-material capability

(e.g., TPU, PA6, PP)
Ideal for prototyping
+ short runs
+ fast design iteration

AGENDA

No exact times—those will be chosen via Calendly after form

Donec ullamcorper nulla non metus auctor fringilla. Sed posuere consectetur est at lobortis. Morbi leo risus, porta ac consectetur ac et magnis dis parturient montes.

Read more

Track A — Miniatures & collectibles
Donec aliquam dictum quis, tincidunt molestie, neque nibh ultricies nec, aliquam purus. Fusce convallis non, facilisis sodales. Vivamus sem at augue. Nulla et magnis dis parturient montes, nascetur ridiculus mus. Vivamus justo.
Track B — Footwear & soft components
Donec aliquam dictum quis, tincidunt molestie, neque nibh ultricies nec, aliquam purus. Fusce convallis non, facilisis sodales. Vivamus sem at augue. Nulla et magnis dis parturient montes, nascetur ridiculus mus. Vivamus justo.
Track C — Electronics accessories & housings
Donec aliquam dictum quis, tincidunt molestie, neque nibh ultricies nec, aliquam purus. Fusce convallis non, facilisis sodales. Vivamus sem at augue. Nulla et magnis dis parturient montes, nascetur ridiculus mus. Vivamus justo.
Track D — Custom case studies (BYO part)
Donec aliquam dictum quis, tincidunt molestie, neque nibh ultricies nec, aliquam purus. Fusce convallis non, facilisis sodales. Vivamus sem at augue. Nulla et magnis dis parturient montes, nascetur ridiculus mus. Vivamus justo.

Best-fit applications

Perfect for:

  • Moldmakers & prototyping service bureaus adding a faster tooling route

  • OEMs doing frequent design iterations before committing to metal tooling

  • Short runs, pilot series, market tests, and variants

What you’ll see at ARBURG Technology Days

  • Live plug & play integration on an IMM

  • The SiOCAST silicone-mold injection workflow end-to-end

  • How fast you can go from design change → new parts

  • Examples of prototypes and short-run parts across different geometries

Simple 3-step workflow

PRINT. Create the master
MOLD. Vulcanize the silicone mold
MAKE. Inject parts on an IMM with the SiOCAST Phase 2 system

Small disclaimer

Silicone tooling is designed for speed and flexibility. For ultra-tight tolerance requirements, metal tooling may still be the final step — but SiOCAST helps you get there faster, with far less risk.

Ready to evaluate if this fits your prototyping workflow?

Book a video meeting next week and we’ll review:

  • your part geometry

  • target material behavior

  • expected volumes and timeline

  • the fastest validation route with SiOCAST